2010 Hyundai Genesis Coupe Wheel & Tire Sizes
Complete fitment guide for the 2010 Hyundai Genesis Coupe: factory tire sizes, compatible wheel diameters, widths and offsets, and the 5x114.3 bolt pattern — for every trim.
Bolt Pattern
5x114.3
Centre Bore
66.7 mm
Lug nuts
M12 x 1.5
Torque: 88 - 107 Nm
TPMS
433 MHz
Factory (OEM) Tire Sizes for the 2010 Hyundai Genesis Coupe
Front / square fitments
Rear (staggered fitments)
Click any size to shop tires in stock now — free shipping anywhere in Canada, optional installation at our 5 GTA locations.
2010 Hyundai Genesis Coupe Wheel Fitment by Trim
Compatible wheel diameter, width and offset ranges for each 2010 Hyundai Genesis Coupe configuration. Trims with different front and rear specs run a staggered setup.
2.0 T · Coupe, 2d
Staggered2.0L · I4 · Petrol
| Spec | Front | Rear |
|---|---|---|
| Wheel diameter | 18–20" | 18–20" |
| Wheel width | 7.5–9" | 8–10.5" |
| Wheel offset | 32–35 mm | 35–38 mm |
| Tire width | 225–245 mm | 245 mm |
3.8 MPi · Coupe, 2d
Staggered3.8L · V6 · Petrol
| Spec | Front | Rear |
|---|---|---|
| Wheel diameter | 18–20" | 18–20" |
| Wheel width | 7.5–9" | 8–10.5" |
| Wheel offset | 32–35 mm | 35–38 mm |
| Tire width | 225–245 mm | 245 mm |
2010 Hyundai Genesis Coupe Fitment FAQ
What is the bolt pattern on a 2010 Hyundai Genesis Coupe?
The 2010 Hyundai Genesis Coupe uses a 5x114.3 bolt pattern (5 lug nuts on a 114.3 mm circle) with a 66.7 mm centre bore.
What size tires fit a 2010 Hyundai Genesis Coupe?
Factory (OEM) tire sizes for the 2010 Hyundai Genesis Coupe include 225/45R18, 225/40ZR19; staggered rear fitments use 245/45R18, 245/40ZR19. Always confirm against the placard inside the driver's door jamb.
What wheel sizes can I put on a 2010 Hyundai Genesis Coupe?
Depending on trim, the 2010 Hyundai Genesis Coupe accepts wheels from 18" up to 20" in diameter with the correct width and offset — larger diameters typically require lower-profile tires to keep the overall rolling diameter stock.
What lug nut size does a 2010 Hyundai Genesis Coupe use?
The 2010 Hyundai Genesis Coupe uses M12 x 1.5 lug nuts, torqued to 88 - 107 Nm.
Fitment data is provided as a guide. Always verify sizes against your vehicle's door-jamb placard or with our fitment experts before ordering.