2013 Ford Mustang Shelby GT500 Wheel & Tire Sizes
Complete fitment guide for the 2013 Ford Mustang Shelby GT500: factory tire sizes, compatible wheel diameters, widths and offsets, and the 5x114.3 bolt pattern — for every trim.
Bolt Pattern
5x114.3
Centre Bore
70.5 mm
Lug nuts
1/2" - 20 UNF
Wheel Diameters
19"–21"
Factory (OEM) Tire Sizes for the 2013 Ford Mustang Shelby GT500
Front / square fitments
Rear (staggered fitments)
Click any size to shop tires in stock now — free shipping anywhere in Canada, optional installation at our 5 GTA locations.
2013 Ford Mustang Shelby GT500 Wheel Fitment by Trim
Compatible wheel diameter, width and offset ranges for each 2013 Ford Mustang Shelby GT500 configuration. Trims with different front and rear specs run a staggered setup.
5.8 Ti-VCT · Coupe, 2d
Staggered5.8L · V8 · Petrol
| Spec | Front | Rear |
|---|---|---|
| Wheel diameter | 19–21" | 19–21" |
| Wheel width | 9–10" | 9.5–12" |
| Wheel offset | 25–35 mm | 35–45 mm |
| Tire width | 265–305 mm | 285 mm |
2013 Ford Mustang Shelby GT500 Fitment FAQ
What is the bolt pattern on a 2013 Ford Mustang Shelby GT500?
The 2013 Ford Mustang Shelby GT500 uses a 5x114.3 bolt pattern (5 lug nuts on a 114.3 mm circle) with a 70.5 mm centre bore.
What size tires fit a 2013 Ford Mustang Shelby GT500?
Factory (OEM) tire sizes for the 2013 Ford Mustang Shelby GT500 include 265/40ZR19; staggered rear fitments use 285/35ZR20. Always confirm against the placard inside the driver's door jamb.
What wheel sizes can I put on a 2013 Ford Mustang Shelby GT500?
Depending on trim, the 2013 Ford Mustang Shelby GT500 accepts wheels from 19" up to 21" in diameter with the correct width and offset — larger diameters typically require lower-profile tires to keep the overall rolling diameter stock.
What lug nut size does a 2013 Ford Mustang Shelby GT500 use?
The 2013 Ford Mustang Shelby GT500 uses 1/2" - 20 UNF lug nuts.
Fitment data is provided as a guide. Always verify sizes against your vehicle's door-jamb placard or with our fitment experts before ordering.