2010 Dodge Challenger Wheel & Tire Sizes
Complete fitment guide for the 2010 Dodge Challenger: factory tire sizes, compatible wheel diameters, widths and offsets, and the 5x115 bolt pattern — for every trim.
Bolt Pattern
5x115
Centre Bore
71.5 mm
Lug nuts
M14 x 1.5
Torque: 176 Nm
TPMS
433 MHz
Factory (OEM) Tire Sizes for the 2010 Dodge Challenger
Front / square fitments
Rear (staggered fitments)
Click any size to shop tires in stock now — free shipping anywhere in Canada, optional installation at our 5 GTA locations.
2010 Dodge Challenger Wheel Fitment by Trim
Compatible wheel diameter, width and offset ranges for each 2010 Dodge Challenger configuration. Trims with different front and rear specs run a staggered setup.
3.5 SOHC · Coupe, 2d · RWD
Staggered3.5L · V6 · Petrol
| Spec | Front | Rear |
|---|---|---|
| Wheel diameter | 17–22" | 17–22" |
| Wheel width | 7–10" | 10–11.5" |
| Wheel offset | 7–25 mm | 12–29 mm |
| Tire width | 215–245 mm | 215–245 mm |
5.7 HEMI · Coupe, 2d · RWD
Staggered5.7L · V8 · Petrol
| Spec | Front | Rear |
|---|---|---|
| Wheel diameter | 18–22" | 18–22" |
| Wheel width | 7.5–10" | 10–11.5" |
| Wheel offset | 7–25 mm | 12–29 mm |
| Tire width | 235–265 mm | 235–265 mm |
6.1 HEMI · Coupe, 2d · RWD
Staggered6.1L · V8 · Petrol
| Spec | Front | Rear |
|---|---|---|
| Wheel diameter | 20–22" | 20–22" |
| Wheel width | 9–10" | 10–11.5" |
| Wheel offset | 7–25 mm | 12–29 mm |
| Tire width | 245 mm | 255 mm |
2010 Dodge Challenger Fitment FAQ
What is the bolt pattern on a 2010 Dodge Challenger?
The 2010 Dodge Challenger uses a 5x115 bolt pattern (5 lug nuts on a 115 mm circle) with a 71.5 mm centre bore.
What size tires fit a 2010 Dodge Challenger?
Factory (OEM) tire sizes for the 2010 Dodge Challenger include 215/65R17, 235/55R18, 235/50R19, 245/45ZR20, 245/45R20, 245/40ZR20, 255/40ZR21, 265/30ZR22; staggered rear fitments use 255/45ZR20. Always confirm against the placard inside the driver's door jamb.
What wheel sizes can I put on a 2010 Dodge Challenger?
Depending on trim, the 2010 Dodge Challenger accepts wheels from 17" up to 22" in diameter with the correct width and offset — larger diameters typically require lower-profile tires to keep the overall rolling diameter stock.
What lug nut size does a 2010 Dodge Challenger use?
The 2010 Dodge Challenger uses M14 x 1.5 lug nuts, torqued to 176 Nm.
Fitment data is provided as a guide. Always verify sizes against your vehicle's door-jamb placard or with our fitment experts before ordering.