2017 Chevrolet Cruze Limited Wheel & Tire Sizes
Complete fitment guide for the 2017 Chevrolet Cruze Limited: factory tire sizes, compatible wheel diameters, widths and offsets, and the 5x105 bolt pattern, for every trim.
Bolt Pattern
5x105
Centre Bore
56.5 mm
Lug nuts
M12 x 1.5
Torque: 140 Nm
Wheel Diameters
16"–20"
Factory (OEM) Tire Sizes for the 2017 Chevrolet Cruze Limited
Click any size to shop tires in stock now, free shipping anywhere in Canada, optional installation at our 5 GTA locations.
2017 Chevrolet Cruze Limited Wheel Fitment by Trim
Compatible wheel diameter, width and offset ranges for each 2017 Chevrolet Cruze Limited configuration.
1.4T · Saloon (J300)
1.4L · I4 · Petrol
| Spec | Front & Rear |
|---|---|
| Wheel diameter | 16–20" |
| Wheel width | 6.5–8.5" |
| Wheel offset | 30–48 mm |
| Tire width | 215–235 mm |
1.8i · Saloon (J300)
1.8L · I4 · Petrol
| Spec | Front & Rear |
|---|---|
| Wheel diameter | 16–20" |
| Wheel width | 6.5–8.5" |
| Wheel offset | 30–48 mm |
| Tire width | 215–235 mm |
2017 Chevrolet Cruze Limited Fitment FAQ
What is the bolt pattern on a 2017 Chevrolet Cruze Limited?
The 2017 Chevrolet Cruze Limited uses a 5x105 bolt pattern (5 lug nuts on a 105 mm circle) with a 56.5 mm centre bore.
What size tires fit a 2017 Chevrolet Cruze Limited?
Factory (OEM) tire sizes for the 2017 Chevrolet Cruze Limited include 215/60R16, 215/55R17, 225/50R17, 225/45R18. Always confirm against the placard inside the driver's door jamb.
What wheel sizes can I put on a 2017 Chevrolet Cruze Limited?
Depending on trim, the 2017 Chevrolet Cruze Limited accepts wheels from 16" up to 20" in diameter with the correct width and offset, larger diameters typically require lower-profile tires to keep the overall rolling diameter stock.
What lug nut size does a 2017 Chevrolet Cruze Limited use?
The 2017 Chevrolet Cruze Limited uses M12 x 1.5 lug nuts, torqued to 140 Nm.
Fitment data is provided as a guide. Always verify sizes against your vehicle's door-jamb placard or with our fitment experts before ordering.