2010 Aston Martin DBS Wheel & Tire Sizes
Complete fitment guide for the 2010 Aston Martin DBS: factory tire sizes, compatible wheel diameters, widths and offsets, and the 5x114.3 bolt pattern — for every trim.
Bolt Pattern
5x114.3
Centre Bore
68.1 mm
Lug nuts
M14 x 2.0
TPMS
433 MHz
Factory (OEM) Tire Sizes for the 2010 Aston Martin DBS
Front / square fitments
Rear (staggered fitments)
Click any size to shop tires in stock now — free shipping anywhere in Canada, optional installation at our 5 GTA locations.
2010 Aston Martin DBS Wheel Fitment by Trim
Compatible wheel diameter, width and offset ranges for each 2010 Aston Martin DBS configuration. Trims with different front and rear specs run a staggered setup.
5.9i · Volante
Staggered5.9L · V12 · Petrol
| Spec | Front | Rear |
|---|---|---|
| Wheel diameter | 20–21" | 20–21" |
| Wheel width | 8.5" | 11" |
| Wheel offset | 42 mm | 54 mm |
| Tire width | 245 mm | 295 mm |
2010 Aston Martin DBS Fitment FAQ
What is the bolt pattern on a 2010 Aston Martin DBS?
The 2010 Aston Martin DBS uses a 5x114.3 bolt pattern (5 lug nuts on a 114.3 mm circle) with a 68.1 mm centre bore.
What size tires fit a 2010 Aston Martin DBS?
Factory (OEM) tire sizes for the 2010 Aston Martin DBS include 245/35ZR20, 245/30ZR21; staggered rear fitments use 295/30ZR20, 295/25ZR21. Always confirm against the placard inside the driver's door jamb.
What wheel sizes can I put on a 2010 Aston Martin DBS?
Depending on trim, the 2010 Aston Martin DBS accepts wheels from 20" up to 21" in diameter with the correct width and offset — larger diameters typically require lower-profile tires to keep the overall rolling diameter stock.
What lug nut size does a 2010 Aston Martin DBS use?
The 2010 Aston Martin DBS uses M14 x 2.0 lug nuts.
Fitment data is provided as a guide. Always verify sizes against your vehicle's door-jamb placard or with our fitment experts before ordering.